Archive for the 'Article Rewriting' Category

Article Spinning – What You Should Know!

I am fascinated by spinning articles. I have made some observations that I would like to share with you. I think a good article rewriting software tool is a smart tool to have, but I also think some newer article marketers may expect the tool to do their writing for them. They may not be aware of some its limitations and how it works.

If you decide to use one be aware that many on the market are useless. They replace words randomly with synonyms or with a thesaurus and generate gibberish. If you choose to use article rewriting software make absolutely sure that you have complete control of the output and the input.

Maybe this will help explain what article spinners do and what some of their limitations are.

Let’s take a simple example. One original article with three paragraphs (1, A, and X). If your reword each of the paragraphs with two rewritten versions, you now have two additional articles with reworded paragraphs (2BY and 3CZ).

Article #1:  1 A X

Article #2:  2 B Y

Article #3:  3 C Z

You can now swap paragraphs, keeping the order of the pargraphs to make new articles. For instance, I can create an article with paragraphs 1, B, and Z and it would make sense.

But, I cannot have an article with three paragraphs 1, 2, and 3 because the article would consist of the first paragraph of each of the three versions saying the same thing only in different words.

I couldn’t create an article with paragraphs1, B, and C because the second and third paragraphs would be the same second paragraph from versions #2 and #3 using different words. Make sense?

New Articles:

1AX,1AY,1AZ,1BX, 1BY,1BZ, 1CX, 1CY,1CZ
2AX, 2AY, 2AZ, 2BX, 2BY, 2BZ, 2CX, 2CY, 2CZ
3AX, 3AY, 3AZ, 3BX, 3BY, 3BZ, 3CX, 3CY, 3CZ

A total of 27 new articles including the originals! The number of possible combinations is the number of articles you create raised to the power of the number of paragraphs in the article. In this case, 3X3X3 = 27. If you had 5 paragraphs and you changed all 5, then the number of possible articles would be 3X3X3X3X3 = 243 articles. NOTE: This formula only works if you change all of the paragraphs in your article.

The problem, of course, is determining the uniqueness of the article content or, in other words, how much duplicate content exists in these articles.

Click on the link to discover the best human controlled rewriting tool on the market, Rapid Rewriter.

We know that we have three 100% unique articles because we created them. What about the other 24?

We know that none of the 24 will be better than approximately 66% unique or 34% duplicate content of the original article (1AX). Why? Because there were only 3 paragraphs changed. None of the articles can have more than two different paragraphs. Two of three paragraphs equals 66%.

If you had only 2 paragraphs to change in a 2 paragraph article, none of the articles would be better than approximately 50% unique. If you had 10 paragraphs and changed all 10, the percentage would reach about 90% uniqueness. The more paragraphs the greater the uniqueness. I say approximately because the software algorithms used to compute uniqueness varies.

Another word of caution, the uniqueness of the articles is measured against the original article,1AX, NOT among themselves. So, which ones are unique and which are not? You need an article content software tool to tell you. Content comparison software is available that allows you to choose how many consecutive words, sentences or paragraphs you want to set as a minimum.

In the previous example of the 24 spun articles you will find that around half of them are 70% unique or better, if you set the measurement at 3 consecutive sentences. I choose 3 sentences because most of my paragraphs are that length.

70% is pretty good. Depending on your intent you may want to check the spun articles against one another. But again, depending on your intent that may not matter to you. When you consider that many people submit the same article to multiple directories, what’s a little duplication?

There is only one Article Rewriting Tool that I know of that delivers what it promises! Click on that link and find out why!

Spinning an Article – A Tool to Increase Your Traffic

Spinning an article is the next best thing to creating an entirely new article. Sometimes it is difficult to come up with new ideas for a new article that discusses the same subject. This article on spinning shows that done properly you can create unique and quality content with the same theme as the original article.

No magic bullet exists that will create readable coherent articles from any one article by using automated spinners. Have you experimented with automated spinners? Then you know that article spinning is for the most part a useless endeavor. Or, the system is so complicated and hard to implement that you give up using it.

What if you could create unique quality content, simply and easily? Would that interest you? It did me. Well you can.
New technology can now let you create 10-20 or more unique readable articles quickly. With this rewriting tool, you will increase your output tenfold with less than half the effort.

Many think that rewriting an article is some kind of cheating. It is not. If you are an article marketer, you know that the number of articles you publish is critical to your success. Although the words spinning and rewriting are used interchangeably, some say that rewriting is the same as spinning an article that is not correct.

Spinning an article is the random substitution of words, usually synonyms, in an article. The result is sometimes readable but often it is not. It can also be the mixing of different paragraphs or sentences from different articles to create a “unique” article.

Many writers fail to understand that you must create at least two additional versions of the entire article before you can successfully create multiple spun articles. They think that changing a word here or there or an occasional sentence will do the trick. Not so! You will not get the recommended 70% uniqueness for the spun articles.

You know, as I do, that there are free article spinners on the internet. There is old adage, “You get what you pay for.” I believe that is true.

Develop a simple system. With the original article as a template, start rewriting paragraph by paragraph. You will be surprised how quickly you can think of alternative wording for your original article.

Create two additional versions for each paragraph. This will insure a good number of quality unique spun articles. The number of spun articles generated is dependent on the number of paragraphs in the article and the number of versions you create.

For instance, if you have only two versions of an article with five paragraphs, you will have 32 spun articles. If you have three versions of an article with five paragraphs, you will have 243 spun articles. The number of spun articles increases exponentially. Not all the articles will be 70% or better in uniqueness, but many will.

Wouldn’t that kind of productivity increase your traffic? Of course, it would. What could you do with those unique articles?  You could post them on blogs, forums, and directories. You could create PDF files, newsletters, and e-books.

Think of a reader stumbling on one of your articles on the web, clicking through to your blog or site and finding the very same article – not good. Having a unique article or post will decrease your bounce rate.

If you are a serious article marketer, you know the value of writing many articles to get traffic. With a rewriting tool like Rapid Rewriter, you can easily create many unique readable articles in minutes as opposed to hours.

Spinning an article is easy with the right tool.

10 Tips For Rewriting Your Articles

There’s is nothing more frustrating than reading an article you found interesting and then following the link where you expect to find more interesting material only to find the same article when you get to the new site.
It happens for one of two reasons. One, the author is lazy and doesn’t really care. Or, two, the author doesn’t know any better.
It first happened to me on my own site. I found an old article of mine on the internet and followed the link to test it. Lo and behold, I was directed to the same article on my own website! Not good! Being a newbie, it never crossed my mind that I was directing readers to the same article.
I am now a firm believer in rewriting your articles. Some call it “spinning”. I don’t. There is a difference. Spinning articles implies an automated regurgitation of an original article, either yours are someone else’s.
Here are a few tips to keep in mind when rewriting articles.

  1. Do your rewriting right after you write the original. It is fresh in your memory and easier to come up with alternatives.
  2. Rewrite paragraph by paragraph.
  3. Use synonyms or rearrange the sentences.
  4. Do not limit your changes to just words, phrases, or sentences. Change a paragraph at a time.
  5. For best results, change all the paragraphs. Write at least two versions for each paragraph.
  6. With two or more versions and a quality rewriting tool, you can easily generate 10-20 new unique articles.
  7. Do not use article “spinning software” that randomly replaces words with synonyms or that uses a thesaurus. It is a waste of your time and money and it defeats your purpose. Most often it will result in gibberish.
  8. If you do choose to use “spinning software”, please make sure that it allows you complete control of the input and the output.
  9. Rewriting your articles and submitting them to different directories increase your search engine optimization.
  10. Always check your work with a good comparison tool and check for uniqueness, 75% or better is ideal.

In addition to improving your SEO, rewriting decreases your website bounce rate. Readers are less likely to leave your site if they are reading something different.
I only know of only one software tool that will give you complete control of the output and the input of your rewrite.
Read and watch the video onthis page and decide for yourself. I think you would agree that rewriting your articles for multiple submissions makes sense.

Article Spinning – A Reason To Spin Your Articles

Article spinning has always struck me as a form of cheating. Recently, I changed my mind. I am relatively new to internet marketing. I chose article marketing as my method of marketing because I like to write. That sounds logical enough.

I’m sure you have heard and know that content is king. That being true it must follow that volume is its kingdom. Content without volume is like a king without subjects. Without a kingdom, there are no revenues and the king goes broke.  The kingdom (volume) provides subjects (traffic, readers) which in turn provide revenue.

How do you increase your volume? Here are four answers:

1) Write more;

2) Hire writers to write for you;

3) Buy Private Label Right (PLR) articles and rewrite them or attempt to publish them as is;

4) Spin your original articles.

I have dismissed the first one because I am slow.  Doing nothing else but writing I can only create, write, edit, and format at most three articles a day. I cannot compete with those that write 10 to 20 or more articles a day.

The second way, hiring writers, is too costly for me now and I fear that I would be overly critical and end up rewriting them any way.

The third method, buying PLR articles, I reject for the same reasons as the second. I would end up rewriting the article. Besides, what I have seen of PLRs, the best they can do is give you ideas for articles.

We are left with spinning your article.

Surfing the forums you hear horror stories about automated programs spinning articles that are un-intelligible garbage.

Authors that spin their articles always had me wondering. Why not just write another article?

Many article directories will accept previously published articles. Some do not. Why not submit the same article to directories that will accept them instead of rewriting or spinning? Submitting previously published articles is no different from writing a syndicated column for newspapers. The same article appears in many different newspapers. Why not do the same with an article marketers article?

There is a difference. One day I was re-reading one of my articles that I came across while surfing the internet. I clicked on the link at the bottom just to make sure the link was working properly. The link worked all right, but it went to one of my blogs. Can you guess what the first post on that page was?

Yep, I had just read the same article. I found that to be annoying and, well, poor taste. I think a reader would quickly bounce off the page and go elsewhere.

I decided to re-write the article, but I remembered that the same article was appearing in many other directories. I would have to write many different versions of that same article to give the reader some uniqueness and still convey the original message.

It was then that I became a convert to article spinning. There are other reasons for spinning articles , but that one was what changed my mind.

A word of caution, most article spinning software is not worth the price, free or otherwise. Be very careful, only select a spinner that allows you full control of the output and then check each spun article for uniqueness.

If you want to increase the volume of your output and maintain uniqueness, spin your articles. You will see an increase in your traffic and ultimately an increase in your sales.

Discover the next generation of one-of-a-kind article spinning software! Create many new and unique articles and maintain total control of the content.